Diamond Macro DFS 59202
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 °C. As the outer layer wears away, more sharp diamond particles emerge.
Characteristics:
- Macro Diamond - 15,000 - 30,000 rpm.
- Application - chrome-cobalt, palladium, porcelain.
Packaging:
- 1 piece.
Silicone erasers for acrylic Promotion 5 + 1 (put 6 pcs in the cart and pay for 5 pcs)
Polishing silicone eraser. Intended for the preparation and processing of acrylic dentures.
Characteristics:
- Green erasers: rough machining, coarse-grained.
- Gray erasers: polishing, medium grain.
- Yellow erasers: final polishing, fine-grained.
Packaging:
- 1 piece.
Pencil eraser
Pencil erasers, EVEFLEX pins.
Characteristics:
- The diameter of the eraser is 2x22mm.
- Speed 7,000- 15,000 rpm. max 25,000 rpm.
- Mounted on a special holder (handle mikran code 1527).
Brown color :
- coarse, very hard
Blue color:
- coarse hard
Grey colour:
- medium grain, soft
Red colour:
- fine-grained soft
Green color:
- very fine-grained, soft.
Packaging:
- 1 piece.
Cutter with purple stripe for Cr-Co and Cr-Ni grinding
New Cutters for CHROM-COBALT and CHROM-NICKEL alloys.
Advantages:
- For rough grinding.
- The surfaces of the cutters are equipped with additional cutting edges.
- More efficient and faster grinding.
- Increased durability.
- Max speed 20,000 rpm.
Packaging:
- 1 piece.
Milli-Micron DFS Diamond 54161
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at a temperature of 700 °C. As the outer layer wears away, more sharp diamond particles emerge.
Characteristics:
- Diamond Milli- Micron 15,000 - 30,000 rpm.
- Application - chrome-cobalt, porcelain.
Packaging:
- 1 piece.
Super-Flexiflex diamond separator 0.17mm
Super flexible double-sided separator for separating and contouring ceramics.
Characteristics:
- Mounted on a mandrel.
- Diameter 22mm.
- Thickness 0.17mm.
- Red stripe.
- 5' - 10000 rpm.
Packaging:
- 1 piece.
Two-sided separator 927/220
Double-sided separator with a diamond coating mounted on a holder.
Features:
- Diameter 22x0.30mm.
Package:
1 piece.
WiroFlex rubber rings
Rubber polishing wheels. WiroFlex.
Features:
- Very thin and flexible.
- Applicable to all dental alloys.
- Diameter 22x1.2mm.
Package:
1 piece.
Large plaster separator
Two-sided separator with diamond coating. For cutting plaster models.
Description:
45mm diameter.
Diamond coating according to / ISO 514 (60/40 microns) - Fine
Diamond grit acc. To / ISO 524 (100/80 microns) - Coarse
Package:
- 1 piece.
Small plaster separator
Double-sided separator with a diamond coating for cutting gypsum models.
Description:
30mm diameter
Diamond coating according to / ISO 514 (60/40 microns) - Fine
Diamond grit acc. To / ISO 524 (100/80 microns) - Coarse
Package:
- 1 piece.
Mizzy stones number 5 22mm 1 piece or 50 pieces
MIZZY White stones are made of aluminum oxide.
Application:
- For porcelain.
- Precious and semi-precious metals.
Advantages:
- They cut quickly and accurately and wear evenly.
- Size 5 diameter 22.2 x 3.1mm.
Packaging:
- 1pcs or 50pcs
Packaging:
- 1pcs or 50pcs
EcoChrom rubbers, brown rollers, 100 pcs
EcoChrom rubber for metal, very durable.
Features:
- Brown color
- Diameter 6x22mm
- Speed 8.000- 15.000 rpm. max. 20,000 rpm
Package:
100 pcs
DFS Instrument for shaping polishing erasers
An instrument for shaping polishing erasers, restoring the desired shape to the erasers.
- The instrument is covered with a thick diamond coating.
Packaging:
- 1 piece
DFS Shield Sidia Micro 8mm
Diamond disc (full diamond) for contouring CoCr alloys.
Characteristics:
- Operating range 5-15000 rpm.
- Diameter 8 mm
- Thickness 0.40mm
- Mounted and centered.
Packaging:
- 1 piece
BUTTERFLY large reinforced shield 125/1.0 BF
Reinforced disc for a polisher-grinder.
Characteristics:
- Reinforced on both sides with fiberglass mesh.
- For cutting casting channels.
- Diameter 125x1.0mm
Packaging:
- 1 piece.
BUTTERFLY armored shield diam. 40mm
Armored shields with a handle.
Benefits:
- Reinforced on both sides with a high-performance and durable fiberglass mesh.
- For cutting steel and precious alloys.
- It does not heat the processed material.
- max. speed 38,000 rpm.
Characteristics:
- White color, thickness 40x0.4mm
- yellow color, thickness 40x05 mm,
- green color, thickness 40x0.7 mm,
- blue color, thickness 40x1.0 mm,
- Red color, thickness 40x1.0 mm with reinforcement.
Package:
1 piece.
Blue eraser disc, 1 piece
Flexible silicone polishing erasers.
Intended for processing:
- Porcelain.
- Precious alloys.
- Acrylic.
Characteristics:
- Blue, fine-grained eraser.
- Mirror polishing.
- Speed - 7,000- 10,000 rpm.
- Size 22x3mm
Packaging:
- 1 piece.
Diasynt Plus / Diapro lithium disilicate polishing set
EVE Diasynt Plus / Diapro
A three-stage set of rubbers and stones for the processing of lithium disilicate
Kit composition:
- DIASYNT PLUS stones - pretreatment,
- DIAPRO brown rubbers - smoothing and pre-polishing,
- DIAPRO lime rubbers - high gloss polishing.
Recommended for polishing restorations made of IPS e.max press and other restorations made of Lithium Disilicate, e.g. AMBER Mill
Package:
- stones - 3 pcs
- medium brown erasers - 3 pcs
- fine lime rubber bands - 3 pcs
CeraMaster HP WH6 erasers, pack of 3
Silicone erasers filled with natural diamond particles for quick finishing and polishing of ceramic restorations.
Advantages:
- They do not require polishing paste.
- Long lasting service life.
- Low heat generation.
Packaging:
- 3 pieces
Dynex Brillant discs for lithium disilicate 20x0.8mm 1 pc
Glass fiber reinforced diamond grinding discs, designed for processing and cutting ceramic materials, especially suitable for lithium disilicate.
Renfert catalog number 560820
Advantages:
- They prevent cracking of ceramic materials due to low heat generation.
- Safe trimming of filler channels thanks to very high removal efficiency.
- Gentle to the material thanks to extremely low vibrations
- Max speed 50000 rpm
Packaging:
- 1 piece
Silicone eraser for porcelain and metal, 100 pieces
Renfert silicone erasers are recommended for pre-processing of porcelain and metal. Highly abrasive, they do not leave streaks or "orange film" on the treated surface.
Renfert catalog number 860000
Advantages:
- They grind hard - grinding the surface, shaping.
- No streaks on the ceramic surface.
- They are perfect for processing places where the alloy is adjacent to porcelain.
Technical data:
- Ø 22mm.
- Thickness 3.2 mm.
- Maximum speed 15000 rpm
Packaging:
- 100 pcs.
Milli-Micron Diamond DFS 54102
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Milli-Micron Diamond - 15,000 - 30,000 rpm.
- Application - chrome- cobalt, porcelain.
Package:
1 piece.
Klettfix disc for MT3/MT3pro/MT Plus cutter
The Klettfix system is an affordable solution for wet trimming, ensuring high cutting efficiency.
Renfert catalog number 18031100 - grit 80, 18031200 - grit 120
Advantages:
- Disc for MT Plus./ MT 3/ MT3 pro.
- Gradation 80 (coarse) or 120 (fine)
- Diameter 23.4 cm
Packaging:
- 1 piece.
Corundum discs 38x1.0mm
Corundum discs for cutting casting channels.
- Diameter 38 mm
- Thickness 1.0mm
Package:
- 1 piece
Coarse grinding wheel 80x10mm
Ceramic grinding wheel 80/10 mm for mounting on a stationary grinder.
Application:
- for rough grinding of metals, precious alloys, chrome, cobalt, stainless steel and other non-precious alloys.
- max speed 2800 rpm
Package:
1 piece
Separator with diamond coating 20/03 BF
Ultrathin reinforced diamond separator.
Advantages:
- Very flexible, with high performance and strength.
- Double reinforcement with a very thin glass fiber mesh.
Application:
- for cutting and processing porcelain and zirconium
Speed max:
- 50,000 rpm
- Diameter 20 / 0.3 mm
Packaging:
1 piece.
Butterfly ultra-fine grinding wheel 22 / 0.2 + BF
Ultra-thin grinding wheel for steel and alloys.
Features:
- Very flexible, reinforced on both sides with a glass fiber mesh, with high efficiency and durability.
- For cutting steel, precious alloys and plastics.
- It does not cause heating of the processed material and excessive load on power tools.
- Max rotation speed: 50,000 rpm
- Diameter 22x02 + BF
Package:
1 piece.
Plaster Cut saw blade, inner diameter 16mm/outer 75mm
Plaster disc with diamond edge.
Description:
- Use in the range from 3 to 5000 rpm.
- Hole diameter: 16 mm.
- Outer diameter: 75 mm
- Disc thickness: 0.35 mm.
Packaging:
- 1 piece
Zirconium development kit for the dentist
A set of rubber bands and stones for the contra-angle for the preparation of zirconium by the dentist.
Package:
1 set
Silicone rubber bands for metal
EveFlex The highest quality hard polishing rubbers intended for processing such materials as: chrome, cobalt, precious and non-precious alloys. They are characterized by durability and are intended for works where it is required to keep the shape of the rubber band, and not its flexibility.
Blue EveFlex 500:
- very coarse for roughing
Gray EveFlex 600:
- coarse-grained for pre-treatment
EveFlex 700 red:
- medium-grained for polishing
Green Eveflex 800:
- fine-grained for final polishing.
Attention:
Please select a shape from the drop-down list below the picture and select the shape according to the numbering.
Package:
- 1 piece
ECO-Disk reinforced shields 38x1.0mm Promotion
Reinforced shields 38x1.0mm
The color may differ from that shown in the photo.
Package:
- 1 piece
Diadur Canyons for porcelain and metal DD-13m
Diadur - Ceramic stones with diamond coating.
Embankment:
- Medium (medium)
Advantages:
- maintains its shape during wear.
- excellent durability
- heat resistant, does not overheat during operation.
- recommended working speed 10,000 - 15,000 rpm. max. 35,000 minutes
Package:
1 piece.
Milli-Micron Diamond DFS 54242
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Milli-Micron Diamond - 15,000 - 30,000 rpm.
- Application - chrome- cobalt, porcelain.
Package:
- 1 piece.
Carbon-silicon discs for metal 38x0.6mm 1 piece
Particularly recommended for cutting sprues and processing cast metal frames.
Renfert catalog number 652000
Advantages:
- Long service life under heavy loads.
- Efficiency.
Technical data:
- Ø 38mm.
- Thickness 0.6 mm.
- For the handpiece.
- Application to metal.
- Max. rpm 25000 rpm.
Packaging:
- 1 piece
Silicone rubber bands blue Promotion 5+1 (put 6 pcs in the cart and you will pay for 5 pcs)
Blue EVE eraser for the final polishing of acrylic. Reinforced with an aluminum oxide compound that extends the life and reliability of the eraser. Can be sterilized in autoclaves for 30-45 minutes.
Characteristics:
- dark blue [coarse]: reduction and shaping
- light blue [medium]: smoothing
Packaging:
- 1 piece.
Dura-Green Porcelain Stones 1 pc.
Dura-Green stones are made of high quality silicon carbide.
Application:
- For porcelain.
- For composite.
- For precious metals.
Recommended rotational speed for Dura-Green stones:
- from 5,000 to 20,000 rpm.
Packaging:
- 1 piece
0 degree milling kit
A set of drills and erasers for milling 0 degrees
Package:
1 set contains 12 cutters and 6 rubbers
Micro DFS 50214 diamond
Sidia synthetic diamond are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer wears out, more sharp diamond particles emerge.
Features:
- Micro diamond 15,000 - 30,000 rpm.
- Application - chrome - cobalt, palladium, porcelain.
Package:
- 1 piece.
Micro DFS 50181 diamond
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at the temperature of 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Micro Diamond - 15,000 - 30,000 rpm.
- The use of chrome- cobalt, palladium, porcelain.
Package:
- 1 piece.
Micro DFS 50215 diamond
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at the temperature of 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Micro Diamond - 15,000 - 30,000 rpm.
- The use of chrome- cobalt, palladium, porcelain.
Package:
- 1 piece.
Diamond Micro DFS 50400
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 degrees Celsius. As the outer layer wears out, more sharp diamond particles emerge.
Characteristics:
- Diamond Micro - 15,000 - 30,000 rpm.
- Application: chrome - cobalt, palladium, porcelain.
Packaging:
- 1 piece.
Micro DFS 50202 diamond
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at the temperature of 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Micro Diamond - 15,000 - 30,000 rpm.
- The use of chrome- cobalt, palladium, porcelain.
Package:
- 1 piece.
Micro DFS 50620 diamond
Sidia synthetic diamond are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer wears out, more sharp diamond particles emerge.
Features:
- Micro diamond 15,000 - 30,000 rpm.
- Application - chrome - cobalt, palladium, porcelain.
Package:
- 1 piece.
Plaster Cut saw blade, inner diameter: 20mm/outer: 75mm
Plaster disc with diamond edge.
Description:
- Use in the range from 3 to 5000 rpm.
- Hole diameter: 20 mm.
- Outer diameter: 75 mm
- Disc thickness: 0.35 mm.
Packaging:
- 1 piece
Diapro Twist eraser for Lithium Disilicate LiSi DT-H17DPmf
Diaphragm rubbers with diamond coating for processing and polishing works made of Lithium Disilicate.
Advice:
- we recommend DIASYNT PLUS stones for initial grinding
Characteristics:
- Brown color (medium). Pre-polishing.
- Speed 7.000- 12.000 rpm, max.20.000 rpm
- Size 17x1.8mm
Package:
- 1 piece
Eraser, green lens, 22mm, 1 piece
The green Eveflex eraser is intended for processing precious and base metals to obtain a high gloss.
Description:
- Dimensions: width 22.0 mm and thickness 4.0 mm.
- Recommended operating speed 7,000 - 12,000 rpm.
- To be mounted on a mandrill.
Packaging:
- 1 piece
Butterfly reinforced grinding wheel with diamond coating 20 / 0.2 BF
Ultrathin reinforced diamond separator.
Advantages:
- Very flexible, with high performance and strength.
- Double reinforcement with a very thin glass fiber mesh.
Application:
- for cutting and processing porcelain and zirconium
Speed max:
- 50,000 rpm
- Diameter 20 / 0.2 mm
Packaging:
1 piece.
Butterfly reinforced ultra-thin grinding wheel 26/02 + BF
Ultra-thin grinding wheel for steel and alloys.
Features:
- Very flexible, reinforced on both sides with a glass fiber mesh, with high efficiency and durability.
- For cutting steel, precious alloys and plastics.
- It does not cause heating of the processed material and excessive load on power tools.
- Max rotation speed: 50,000 rpm
- Diameter 26x02 + BF
Package:
1 piece.