Plaster Cut saw blade, inner diameter: 16mm/outer: 85mm
Plaster disc with diamond edge.
Description:
- Use in the range from 3 to 5000 rpm.
- Hole diameter: 16 mm.
- Outer diameter: 85 mm
- Disc thickness: 0.3 mm.
Packaging:
- 1 piece
DIAPOL 3-step set for polishing ceramics RA 305
Set of 9 contra-angle rubbers for the dentist processing of ceramics.
Package:
- set of 9 pieces
Diamond Stone Roller final polishing
High-quality ceramic stones for the final grinding of zirconium oxide and all types of ceramics, including pressed. The full concentration of diamond and the use of a modern binder allows for very effective grinding without generating high temperature during processing, which protects the structure of the material being processed against damage. The use of the most modern manufacturing techniques allows for very efficient work.
Technical data:
- Recommended speed 15,000-20,000 rpm.
- Diameter 6 mm
- Height 13 mm
- Speed 50,000 rpm.
Package: 1 pc
DFS Shield Sidia Micro 19mm
Diamond disc (full diamond) for contouring CoCr alloys.
Characteristics:
- Operating range 5000-15000 rpm.
- Diameter 19 mm
- Thickness 0.30mm
- Mounted and centered.
Packaging:
- 1 piece
EVE Stone Diacon DI-R22m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 22x2mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
EVE Stone Diacon DI-L26m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 26x2.5mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
EVE Stone Diacon DI-R17m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 17x3mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
EVE Stone Diacon DI-13m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 4x10mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
Diacera Twist Zirconia Erasers DT-H17DC
Diacera diamond coated erasers for polishing and polishing works made of Zirconium Oxide.
Advice:
- For preliminary grinding, we recommend DIASYNT PLUS stones, for preliminary polishing of the DIACERA medium (green)
Characteristics:
- Beige (fine) color high gloss polishing.
- Speed 7.000- 12.000 rpm, max.20.000 rpm
- Size 17x1.6mm
Package:
- 1 piece
Diacera Twist Zirconia Erasers DT-H17DCmf
Diacera diamond coated erasers for polishing and polishing works made of Zirconium Oxide.
Advice:
- We recommend DIASYNT PLUS stones for initial grinding
Characteristics:
- Green (medium) pre-polishing.
- Speed 7.000- 12.000 rpm, max.20.000 rpm
- Size 17x1.6mm
Package:
- 1 piece
AC cutter for acrylic
Cutters for processing acrylic materials with cross cuts.
The 4shine cutters series is a series of cutters made of fine-grained sintered carbide with high hardness, specially adapted to the needs of dental technicians. Each cutter was made using the most modern Swiss CNC milling machines. Rigorous, ultra-accurate testing guarantees high concentricity and cutting efficiency.
Packaging:
- 1 piece
SC Cutter for plaster
Milling cutters for processing dry plaster (cutter with a green stripe) and wet plaster (cutter with a black stripe) with thick and very thick cross cuts.
The 4shine cutters series is a series of cutters made of fine-grained sintered carbide with high hardness, specially adapted to the needs of dental technicians. Shapes, sizes and types of cuts selected together with professionals from around the world. Each cutter was made using the most modern Swiss CNC milling machines. Rigorous, ultra-accurate testing guarantees high concentricity and cutting efficiency.
Packaging:
- 1 piece
TC Cutter for thermoplastics
Milling cutters with cross-cuts for processing thermoplastic materials.
The 4shine cutters series is a series of cutters made of fine-grained sintered carbide with high hardness, tailored specifically to the needs of dental technicians. Shapes, sizes and types of cuts selected together with professionals from around the world. Each cutter was made using the most modern Swiss CNC milling machines. Rigorous, ultra-accurate testing guarantees high rotational accuracy and cutting efficiency.
Packaging:
- 1 piece
Milling cutter with a very fine cross cut for ceramics and precious metals
Sintered carbide cutters with very fine cross cuts (yellow stripe). Made in the EU.
Application:
- For the final processing of ceramics, gold and precious metal alloys.
Packaging:
- 1 piece
Milling cutter with a fine cross cut for ceramics, chrome and nickel alloys
Sintered carbide cutters with small cross cuts (red stripe). Made in the EU.
Application:
- For the final processing of precious metal alloys, chromium-nickel alloy, steel and acrylic.
- For roughing ceramics, shaping and contouring.
Packaging:
- 1 piece
Standard cross cut cutter for chromium-nickel alloy, chromium-cobalt and other alloys
Carbide cutters with standard cross cuts (blue stripe). Made in the EU.
Application:
- For the rapid development of chromium-nickel, chromium-cobalt and other types of alloys.
Packaging:
- 1 piece
Cutter 202 with a black "lance" stripe for developing thermoformable foils
Carbide drill bit for quickly and cleanly separating, cutting or finishing all hard thermoforming materials, plaster and other materials.
- Length of the working part 11 mm.
- Max speed 20,000 rpm.
Packaging:
- 1 piece
Milling cutter with a thick cross cut for acrylic, plaster and plastics
Sintered carbide cutters with thick cross cuts (green stripe). Made in the EU.
Application:
- For processing plaster and acrylic.
- For rapid processing of plastics.
Packaging:
- 1 piece
Milling cutter with fine spiral cuts for precious metals, metal-ceramics and titanium
Carbide cutters with fine spiral cuts (White stripe). Made in the EU.
Application:
- For the development of precious metal alloys, metal ceramics and titanium.
Packaging:
- 1 piece
Milling cutter with cross-transverse cuts for metal
Sintered carbide cutters with cross-transverse cuts (purple stripe). Made in the EU.
Application:
- For the development of chromium-cobalt and chromium-nickel alloys.
Packaging:
- 1 piece
Milling cutter with straight cuts and an additional transverse cut for silicone.
Carbide cutters with straight cuts and additional cross cut. Made in the EU.
Application:
- For silicone development.
- For precise processing of edges and surfaces.
Packaging:
- 1 piece
Milling cutter with thick straight cuts and an additional transverse cut for soft materials.
Carbide cutters with thick straight cuts and an additional transverse cut (black stripe). Made in the EU.
Application:
- For processing soft materials - acrylic, resin, silicone (soft denture relining).
Packaging:
- 1 piece
Milling cutter with small straight cuts for gold, metal and acrylic
Carbide cutters with fine straight cuts (red stripe). Made in the EU.
Application:
- For final processing and gentle removal of gold, other metals and acrylic.
Packaging:
- 1 piece
Milling cutter with standard straight cuts for metal
Carbide cutters with standard straight cuts (blue stripe). Made in the EU.
Application:
- For the rapid development of chromium-cobalt, chromium-nickel, and other types of alloys.
Packaging:
- 1 piece
Milling cutter with thick straight cuts for acrylic and plaster
Carbide cutters with thick straight cuts (green stripe). Made in the EU.
Application:
- For quick and efficient processing of acrylic and plaster.
Packaging:
- 1 piece
Milling cutter with very thick straight cuts for acrylic and plaster
Carbide cutters with very thick straight cuts (black stripe). Made in the EU.
Application:
- For rough processing of plaster and acrylic.
Packaging:
- 1 piece